Homepage
With the bidirectional RCJ35 flush-mounted receiver, a 230V tubular motor can be controlled by Easywave transmitters or via button inputs.
The running time of the motor can be set separately for each direction.

The operating modes available are the 1-button, 2-button and 3-button operation.
The 2-button and 3-button operation modes can also be set as blind operation with slat adjustment.

Programming is simply done on the device by pressing a button or via radio using remote learning (POTA).

The flat design facilitates installation in flush-mounted sockets, behind switches or behind sockets.

RCJ35EN5001A01-K
Technical specifications
Coding Easywave neo
Up to 32 transmitters can be programmed
POTA
Frequency 868,30 MHz
Channels 1
Power supply 230 V AC, 50 Hz
Power consumption 0,4 W standby
0,8 W relay switched (without load)
Operating modes SEQUENCE (1-button operation)
UP/DOWN (2-button operation)
UP/STOPP/DOWN (3-button operation)
Slat adjustment
Input 2 external buttons
Output 2 potential-loaded relay contacts (normally open)
Maximum contact load resistive load: 5A / 1150 VA
inductive load: 3A / 690 VA
Operating temperature -20 °C to +45 °C
Dimensions 43 x 42 x 17,5 mm
Scope of delivery
  • Flush-mounted receiver
  • Operating manual
Models
Product numbers Description
RCJ35EN5002A01-K Flush-mounted receiver, Easywave neo, 230V, 1x motor, potential-loaded, button input
Wiring diagram